平行平板横向剪切干涉仪装调误差的矫正方法研究

对平行平板双光路横向剪切干涉仪的装调进行了研究,提出了一种矫正两个平行平板之间角度误差的方法.输出激光的波前采用Zernike多项式拟合,经过理论推导,发现两个方向差分波前求解出的倾斜像散之差与平行平板的角度误差存在线性关系,利用两个方向倾斜像散之差来矫正两个平行平板之间的角度误差.在平行平板横向剪切干涉仪的装调过程中使两个方向差分波前的倾斜像散之差为零即可以使两个方向的平行平板之间的角度误差值为零.进一步地从实验上证明了这个线性关系,对于所用的实验系统,当离焦像差为-3.224 7±0.001 8,两个方向差分波前的倾斜像散之差波动范围为±2.0×10^-3时,平行平板的角度误差可以控制在8.82″之内,高阶像差对平行平板的角度误差调节精度的影响约为1.63″.该方法具有装调简单、精确度高,易于流程化操作的优点.     

单晶硅晶格间距的测量技术进展及应用

单晶硅晶格间距是许多重要物理常数测量的基础。本文介绍了硅晶格间距测量技术的发展历程,包括X射线干涉仪直接测量和晶格比较仪间接测量两种方法,以及影响测量结果不确定度的关键因素。得益于晶格间距测量的进展,在纳米尺度,硅晶格间距被国际计量局(BIPM)批准成为新的米定义复现形式。最后介绍了硅晶格在计量学中的应用,以及基于硅晶格实现纳米几何量测量的溯源体系的研究趋势。     

基于光纤智能夹层传感结构的应力测量研究

制作了一种模块化的光纤传感夹层,对夹层内的光纤传感器的应力特性进行了实验研究。分析了应变对传感系数的影响,对埋入到光纤智能夹层中的两种光纤传感器的输出特性进行了比较。实验结果表明:光纤Bragg光栅传感器的波长漂移与应变之间具有理想的线性关系,但应变灵敏度由1.2pm/με降至1.15pm/με;由于制作工艺的局限,对于非本征F-P光纤传感器,当应变达到350με后,应变与载荷具有较好的线性响应。与非本征F-P光纤传感器相比,光纤Bragg光栅传感器是光纤智能夹层首选的应变传感器。将埋入了Bragg光栅传感器的智能夹层粘贴于某型飞机的翼-身连接构件内部进行监测,实验结果为光纤智能夹层应用于复合材料结构的应变监测提供了参考。     

HL-2M 装置固态亚毫米波干涉系统研制

发展了一套固态亚毫米波外差干涉系统和一种基于全相位快速傅里叶变换(apFFT)的相位处理方法用 于测量 HL-2M 初始等离子体电子密度。该系统采用平面型二极管倍频技术对低频的锁相微波源进行高次倍频以 产生功率大于 0.1MW、频率 306.9GHz 的探测波。基于 apFFT 的相位处理数值算法可以从原始信号中提取相位信 息,缓解由可能的高水平密度扰动导致的相位跳变。系统的固有时间分辨率为 5μs,电子密度测量范围在 10¹⁶~10²⁰m⁻³。在 HL-2M 装置首次实验期间,该系统被安装在中平面上,利用装置内壁反射实现干涉测量,成功 测量了线平均电子密度。      

Analysis of the fringes visibility generated by a lateral cyclic shear interferometer in the retrieval of the three-dimensional surface information of an object

We report the evaluation of the topography of an object with projected fringes generated with a lateral cyclic shear interferometer (CSI) and we then compare the topography recovery obtained with the proposed method with the one obtained from a coordinate measuring machine (CMM). We also study how the fringes visibility along the z axis affects the retrieval. Finally, we discuss the advantages and drawbacks of this profilometry system.     

基于LabVIEW机器视觉的迈克耳孙干涉仪实验

基于机器视觉设计了迈克耳孙干涉仪实验,采用机器视觉技术替代人眼对目标(干涉圆环)进行分析与测量,可有效避免因视觉疲劳而造成的测量错误.     

基于迈克尔逊干涉原理测量金属热膨胀系数仪器的改进

在利用迈克尔逊干涉原理测量金属热膨胀系数的基础上,运用CCD成像系统取代原有观察屏,更利于观察并记录数据。     

Polarization phase-shifting interferometer by rotating azo-polymer film with photo-induced optical anisotropy

A new type of phase-shifting interferometer was presented by rotating an azo-polymer film with photo-induced optical anisotropy in the light path of orthogonal polarization interferometry. By changing the angle of the optical axis of the azo-polymer film, four phase-shifted fringe patterns were obtained, from which phase difference between orthogonal polarized light could be calculated. The polarization states and the formation of the interferograms were analyzed theoretically using Jones matrix calculations and the experimental verification of the proposed method was also given. This method has a simple optical configuration which utilizes commercially available polarization devices and anisotropic azo-polymer film of low cost. The phase-shifting interferometer also demonstrates a new application of azo-polymer film.     

In-plane ESPI using an achromatic interferometer with low-coherence laser source

The use of an achromatic interferometer is explored as a means of doing in-plane ESPI measurements using a laser diode as the light source. This interferometer type, which uses a diffraction grating in place of the conventional beamsplitter, has two features that make it suitable for making ESPI measurements over extended areas, even when using a low-coherence laser diode source. First, the parallelogram optical geometry of the interferometer causes all rays passing through to have the same optical path lengths. Second, the interferometer is achromatic, whereby the piezo-actuated mirror that steps the illumination light does so by the same phase angle, independent of wavelength. This latter feature accommodates the spectral impurity of a laser diode source. A periodic variation of fringe visibility is observed in experiments, where narrow ranges of high visibility occur at regular spatial intervals. This behavior derives from the clustered discrete spectral character of laser diode light output. A method to “tune” the interferometer by slightly rotating the diffraction grating is described so as to achieve consistent high fringe visibility throughout the measured images.     

双孔干涉产生偏振奇点分析

在近轴近似的条件下,采用标量衍射积分的方法,对电磁场的双孔干涉进行了研究,并对千涉场中产生偏振奇点的情况进行了推广。在研究中通过双孔的光电场为线偏振状态,具有不同的偏振方向。数值计算结果表明,即使通过双孔的光电场的相位相同,只要双孔的尺寸存在一定的差异,干涉场中除了能够产生普通的的线偏振外,圆偏振奇点也会出现。